POLAR : ATLAS - Loss measurement system

ATLAS - ATtenuation Loss Analysis System is new test solution for PCB fabricators to test PCB transmission line losses in a tightly controlled production environment. Atlas software interfaces with industry standard Tektronix DSA8200 oscilloscope TDRs and supports Intel’s SET2DIL (Single-ended TDR to Differential Insertion Loss) test methodology for extraction of differential insertion loss from a single ended test and suitably designed coupon.

Download Intel’s SET2DIL Paper. Download Atlas Brochure. Click here for FAQs.

System configurations :

ATLAS - Atlas Software with HF Probes and Loss Test Standard

Speedstack SI—Stack design with Controlled Impedance and loss prediction suitable for high speed PCB designers. Download Brochure

C Gen Plus—Auto Coupon Generator for SET2DIL Lossy Coupons. Download Brochure

POLAR : CITS - Controlled Impedance Test System Solutions

CITS900s4 systems is the seventh generation Impedance test system from Polar. It is PCB industries standard equipment of choice for testing high speed controlled impedance PCB. CITS900s4 provides both differential and single ended measurement capability with it’s 4 channels that provide flexible probe connection.

Now available with Polarcare protect program that extends the warranty and support for the ESD sensitive system.

Download CITS900s4 Brochure

IHARA : ACCULINE - Portable line width and spacing measurement

Polar Asia Pacific in colaboration with Ihara Electronics Co. Ltd, Japan presents ACCULINE a truly portable, light weight, battery operated, digital line width and spacing measurement system. ACCULINE's built in colour LCD display allows operators to make quick, accurate and repeatable measurements for top and bottom line width and spacing for fine line single ended and differential controlled impedance traces.

ACCULINE is a high performance and reliable product which utilizes advanced micro computer technology and colour LCD image sensor to ensure superior performance and measurement reliability. It is a battery operated tool offering a truly portable unit that makes operation easy at any location inculding dark rooms with low visibility. The large LCD displays real line images that can be transferred to a PC, using a USB port, for further analysis.

Usually operators rely on skill to make measurements using a microscope and this can result in varied results for different operators. ACCULINE's automated measurement algorithm provides accurate and repeatable results in its place.

Download ACCULINE Brochure

InScan Limited : FI 8/6 Series - Automated Visual Inspection Systems

Polar Asia Pacific in colaboration with InScan Limited Hong Kong presents FI 8/6 Series. InScan FI-8 is a compact and high performance Semi/Fully automatic double sided AVI system for final inspection of PCB boards. 

In contrast to the FI-6 Series, which does only single sided board inspection through one high resolution interline CCD sensors, the FI-8 Series system's design includes two high resolution interline CCD sensors which perform parallel image acquisition asynchronously. This enables dramatic cutback in board inspection time, which in turn leads to high system throughput.

In addition to the advantages of the FI-6 seires, the FI-8 series hardware architecture allows the customer to choose his preferred automation module: fully automatic, semi automatic or standalone. The architecture is very flexible and allows the user to upgrade the automation module at any given time, without the need to purchase a new system.

Also, InScan FI-8 & FI-6 can also be connected to multiple online verification stations. Each station enables the user to verify and mark inspected defects in parallel to the inspection process. One of the biggest advantage of this system is that the operator's activites and production data is collected in a central database. The system analyzes this data and allows users to view real time reports on QC status, production trends and throughput.

Download FI 8 Brochure

Download FI 6 Brochure

ASR Instruments : SIRTS - Surface Insulation Resistance Test System

Polar Asia Pacific in colaboration with ASR Instruments Inc., USA presents SIRTS. It is a new patented SIR/MIR, Conductive Anoidic Filament (CAF) resistance and electrochemical migration test system. 

It meets and exceeds the requirements  for Hewlet Packard's EL-EN861-00 (ECM) test, IPC-TM-650, IPC-TM-650 2.6.25 and many others.The system uses a unique method of employing solid state switches instead of reed relays used in traditional systems. This eliminates leakage associated with systems using switching relays, enhances system reliability and accuracy. The scan time for 256 channels is reduced from several hours to less than 5 minutes.

Download SIRTS Brochure

PWB : IST - Interconnect Stress Test System

IST is an accelerated stress test method that overcomes the limitations of thermal oven or liquid / liquid methods, IST has the capability of effective / rapidly quantifying the integrity of both the Plated Through Hole (PTH) and the unique ability to identify the presence and levels of post separations within the multilayer board. IST creates a uniform strain from within the substrate, the interconnects ability to distribute and redistribute this strain provides an indication of integrity. The plated barrels and inner layer junctions are “exercised” until the initial failure mode/mechanism is uncovered.

Following several years of intense evaluation, the IPC have approved the IST technology as the first electrical test methodology for assessing plate through hole integrity and for the detection of post separation. The IST methodology is issued in the IPC-TM-650 Test Methods Manual.

IST has become the leading test standard for via and material reliability. Top OEMs, ODMs, CDMs, Material and PCB manufacturers around the world use IST technology to test new materials and processes.

Download IST Brochure

Download IPC-TM-650 Test Methods

IST-HC - New Eight Head Dual Sense IST-High Capacity System. Contact us for more details.

PWB : DELAM - Dielectric Estimation and Laminate Analysis Measurement System

PWB Interconnect Solutions Inc. has developed a tool that automatically measures and analyzes changes in material properties that signify whether damage was caused by exposure to the elevated temperatures associated with component assembly and possible reworks. This unique technology complements their IST testing capability. The principles used by this tool have proven to be an effective methodology in determining whether the materials used in printed wiring boards are capable of withstanding the cyclic exposure to temperatures that exceed the materials inherent robustness.

The test system incorporates a high precision LCR (capacitance) meter which is interfaced to a user friendly application software, which automatically measures, records, analyzes, displays and reports all key test parameters

Download PWB’s DELAM Test Method

Contact us for advance inquiries

AET : Dielectrometer - Microwave Dielectric Meter

The key to successfully design of high speed PCBs is to know the right Dielectric (Dk) and tan Delta value of the pre-preg or core material used for manufacturing the PCB stacks. Currently designers / manufacturers rely on material data provided by the manufacturers. The Microwave Dielectrometer from AET, Inc enables fast and non-destructive measurement of dielectric materials of various shapes, including thin-films, by using an evanescent mode of an open coaxial resonator. A built-in feedback oscillator circuit enables accurate measurements with an easy step-by-step operation. Accuracy is achieved by combining a high Q cavity, a highly accurate measurement algorithm and the 3D electromagnetic simulation software.

Download Brochure

AET : High Frequency Probe Station for measuring losses on PCBs 

Measurement of losses on PCBs, connectors and ICs require careful set-up of high frequency probes to make accurate measurements using Vector Network Analyser (VNA) or Time Domain Refelectometer (TDR). The Probe station from AET, Inc. has a probing stage and a micro positioner that can be adjusted on the X-Y-Z-theta directions, and can probe samples of various shapes and sizes. A custom designed probing fixture allows the use of air coplanar, semi-rigid, or differential active probes. A TRL/LRM calibration kit are designed and manufactured. The probe station can be used for measurement of losses on PCBs and semiconductor wafers for RF circuits.

Download Brochure